Breaking strings is a common if you play the guitar. Changing strings not only costs us money, but it’s a headache and time consuming. Here we will show you why your guitar strings break and how to prevent it from happening. In most circumstances, the issue may be identified by closely inspecting where the string is breaking and making a few little tweaks or adjustments to your guitar to make sure it never happens again. Also using a protective device like a String Sling will not only help prevent breakage but allow your strings to last a lot longer!
Why Guitar Strings Breaks?
1. The Nut is Dirty or Worn
If your strings are snapping at the nut, it’s a sign that something isn’t quite right up top. A nut can usually lead to string breakage in one of two ways: dirt accumulating in the nut’s slot, or a nut that has been worn down by heavier strings. When restringing, it’s always a good idea to clean the nut to eliminate any dust or dirt that has accumulated. The String Sling has plush microfiber that makes it easy to clean your guitar.
2. Defective Tuning Pegs
If your strings are often breaking at the pegs, they could be the root cause of the problem. Tuning pegs can break your strings for a variety of reasons. The string will bend around the tuning peg if the edge is too sharp, and even minor damage to the string will allow it to snap. Of course, there are additional causes, such as built-up dust or burred tuning peg edges.
Even on a brand new guitar, the edge of a tuning peg is frequently burred. To soften the edge, use the old (thicker) string. It’s always a good idea to use a cotton swab to properly access the hole within the tuning peg while cleaning it. You may avoid frequent string breakage at the pegs by cleaning it up and polishing. The String Sling’s microfiber makes it the perfect cleaning tool.
3. Rough Fret Edges
Rough edges on your frets might be to blame if your strings seem to snap over the fretboard area between the nut and bridge. If you’ve exhausted all other possibilities for why your strings are constantly breaking, this is a nice one to examine. This problem is more likely to occur on older guitars. So look for any rough edges or dents on your metal frets, since they might damage your string and break it due to repeated playing friction. Use a String Sling to protect your fretboard.
4. String Corrosion
String rust is one of the most evident explanations. Because some strings are composed of metal and your fingers may become oily and sweaty, rust on the strings is a possibility. Regular strings include a certain amount of iron, which might cause them to corrode with time. They will, of course, lose their flexibility to sustain. After utilizing the same set of strings for a few months or more, you may have noticed that they have gone a little dead. Strings oxidize, or rust, and become weaker as a result. Because they are already weakened, putting a strain on them will quickly break them. A String Sling will not only have your strings last a lot longer but also it will help your strings fresh preventing that deadening sound.
How to prevent guitar string’s from snapping?
- Check the Saddle and Bridge Condition
If both are in poor shape, the durability of your strings may be jeopardized. The saddle, for instance, is prone to producing burrs. The strings are damaged as a result, and they break easily. The bridge is also subjected to some strain. The metal on the bridge surface oxidizes, produces burrs, and develops other defects as your guitar ages, detracting from the smooth surface of the bridge. Both the strings and the tune are affected by this problem.
2. Maintain the Condition of the Nut
Nut slots, like saddles, should provide a seamless transition, but over time, this area can become a point of binding, resulting in decreased string life and sub-optimal tuning. String tensions between both the nut and the tuner might be higher than those south of the nut due to binding, putting excessive stress on the string at the tuner post. Check that the slots are the right size for the strings you’re using. Ensure the openings are smooth as well.
3. Have a String Sling
It prevents your strings from corrosion and oxidation, allowing them to not only sustain but also look cleaner for longer periods of time. The strap attachment is held securely in position by three layers of fastening behind the prominent button, so you won’t be worried about guitar weight or slipping. All regular guitar necks can be wrapped tightly with extra-wide Velcro. To avoid corrosion of your strings, it is recommended to keep them tight. Get a String Sling now to protect your strings and have hem feel fresh for a lot longer.